ST STM32H747I Discovery (M7)

STM32H747XX

System on Chip

ST

Vendor

Hello World

A simple sample that prints “Hello World” to the console.

Run locally

You can run the Hello World demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 hello_world

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 hello_world demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the Hello World executable file

SBOM data

Download Software Bill of Materials data for the Hello World demo

Renode log

Download the Renode simulation log for the Hello World demo

Renode script

Download the Renode script for the Hello World demo

Renode Robot test suite

Download the Renode Robot test suite for the Hello World demo

Robot test suite log

See Robot test results for the Hello World demo

Shell Module

This demo demonstrates the Zephyr shell submodule, which allows the user to use a console interface to control the operating system.

Run locally

You can run the Shell Module demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 shell_module

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 shell_module demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the Shell Module executable file

SBOM data

Download Software Bill of Materials data for the Shell Module demo

Renode log

Download the Renode simulation log for the Shell Module demo

Renode script

Download the Renode script for the Shell Module demo

Renode Robot test suite

Download the Renode Robot test suite for the Shell Module demo

Robot test suite log

See Robot test results for the Shell Module demo

Philosophers

An implementation of a solution to the Dining Philosophers problem which demonstrates the usage of multiple preemptible and cooperative threads of differing priorities, as well as dynamic mutexes and thread sleeping.

Run locally

You can run the Philosophers demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 philosophers

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 philosophers demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the Philosophers executable file

SBOM data

Download Software Bill of Materials data for the Philosophers demo

Renode log

Download the Renode simulation log for the Philosophers demo

Renode script

Download the Renode script for the Philosophers demo

Renode Robot test suite

Download the Renode Robot test suite for the Philosophers demo

Robot test suite log

See Robot test results for the Philosophers demo

TensorFlow Lite Micro

This sample TensorFlow application replicates a sine wave and demonstrates the basics of using TensorFlow Lite Micro. The model included with the sample is trained to replicate a sine function and generates x values to print alongside the y values predicted by the model.

Run locally

You can run the TensorFlow Lite Micro demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 tensorflow_lite_micro

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 tensorflow_lite_micro demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the TensorFlow Lite Micro executable file

SBOM data

Download Software Bill of Materials data for the TensorFlow Lite Micro demo

Renode log

Download the Renode simulation log for the TensorFlow Lite Micro demo

Renode script

Download the Renode script for the TensorFlow Lite Micro demo

Renode Robot test suite

Download the Renode Robot test suite for the TensorFlow Lite Micro demo

Robot test suite log

See Robot test results for the TensorFlow Lite Micro demo

MicroPython

This demo demonstrates the MicroPython Zephyr port by performing arithmetic operations, and by defining and calling simple functions.

Run locally

You can run the MicroPython demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 micropython

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 micropython demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the MicroPython executable file

SBOM data

Download Software Bill of Materials data for the MicroPython demo

Renode log

Download the Renode simulation log for the MicroPython demo

Renode script

Download the Renode script for the MicroPython demo

Renode Robot test suite

Download the Renode Robot test suite for the MicroPython demo

Robot test suite log

See Robot test results for the MicroPython demo

Blinky

A basic sample that blinks an LED forever using the Zephyr GPIO API.

Run locally

You can run the Blinky demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 blinky

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 blinky demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the Blinky executable file

SBOM data

Download Software Bill of Materials data for the Blinky demo

Renode log

Download the Renode simulation log for the Blinky demo

Renode script

Download the Renode script for the Blinky demo

Renode Robot test suite

Download the Renode Robot test suite for the Blinky demo

Robot test suite log

See Robot test results for the Blinky demo

Hello World (user)

A sample that prints “Hello World” to the console from a usermode thread.

Run locally

You can run the Hello World (user) demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 hello_world_user

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 hello_world_user demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the Hello World (user) executable file

SBOM data

Download Software Bill of Materials data for the Hello World (user) demo

Renode log

Download the Renode simulation log for the Hello World (user) demo

Renode script

Download the Renode script for the Hello World (user) demo

Renode Robot test suite

Download the Renode Robot test suite for the Hello World (user) demo

Robot test suite log

See Robot test results for the Hello World (user) demo

Synchronization

A simple application that demonstrates kernel scheduling, communication, and timing. Two threads take turns printing “Hello World” synchronized by semaphores.

Run locally

You can run the Synchronization demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 synchronization

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 synchronization demo in Google Colab.

UART output

Download

Zephyr binary

Download the Synchronization executable file

SBOM data

Download Software Bill of Materials data for the Synchronization demo

Renode log

Download the Renode simulation log for the Synchronization demo

Renode script

Download the Renode script for the Synchronization demo

Renode Robot test suite

Download the Renode Robot test suite for the Synchronization demo

Robot test suite log

See Robot test results for the Synchronization demo

LZ4

This sample application compresses and decompresses a block of data with the LZ4 algorithm and verifies the result.

Run locally

You can run the LZ4 demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 lz4

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 lz4 demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the LZ4 executable file

SBOM data

Download Software Bill of Materials data for the LZ4 demo

Renode log

Download the Renode simulation log for the LZ4 demo

Renode script

Download the Renode script for the LZ4 demo

Renode Robot test suite

Download the Renode Robot test suite for the LZ4 demo

Robot test suite log

See Robot test results for the LZ4 demo

Rust App

This sample demonstrates integration of Rust code into Zephyr RTOS projects.

Run locally

You can run the Rust App demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 rust-app

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 rust-app demo in Google Colab.

UART output

Trace

Download

Zephyr binary

Download the Rust App executable file

SBOM data

Download Software Bill of Materials data for the Rust App demo

Renode log

Download the Renode simulation log for the Rust App demo

Renode script

Download the Renode script for the Rust App demo

Renode Robot test suite

Download the Renode Robot test suite for the Rust App demo

Robot test suite log

See Robot test results for the Rust App demo

Kenning TFLite Micro

This is a demonstration application of Kenning Zephyr Runtime running gesture recognition model on sample data using TFLite Micro.

Run locally

You can run the Kenning TFLite Micro demo on the ST STM32H747I Discovery (M7) board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b stm32h747i_disco_stm32h747xx_m7 kenning-zephyr-runtime-tflitemicro

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run stm32h747i_disco_stm32h747xx_m7 kenning-zephyr-runtime-tflitemicro demo in Google Colab.

UART output

Download

Zephyr binary

Download the Kenning TFLite Micro executable file

SBOM data

Download Software Bill of Materials data for the Kenning TFLite Micro demo

Renode log

Download the Renode simulation log for the Kenning TFLite Micro demo

Renode script

Download the Renode script for the Kenning TFLite Micro demo

Renode Robot test suite

Download the Renode Robot test suite for the Kenning TFLite Micro demo

Robot test suite log

See Robot test results for the Kenning TFLite Micro demo

ADDRESS SPACE	ID	TYPE	DRIVERS	PERIPHERAL
ADDRESS SPACE id: 0x0	ID cpu0	TYPE cpu	DRIVERS	PERIPHERAL ARM cortex-m7
ADDRESS SPACE 0x08000000 - 0x08100000	ID flash0	TYPE mtd	DRIVERS	PERIPHERAL ST stm32-nv-flash
ADDRESS SPACE 0x40011000 - 0x40011400	ID usart1	TYPE serial	DRIVERS	PERIPHERAL ST stm32-usart
ADDRESS SPACE 0x40015000 - 0x40015400	ID spi5	TYPE spi	DRIVERS	PERIPHERAL ST stm32h7-spi
ADDRESS SPACE 0x40028000 - 0x40030000	ID mac	TYPE ethernet	DRIVERS	PERIPHERAL ST stm32-ethernet
ADDRESS SPACE 0x40040000 - 0x40080000	ID usbotg_hs	TYPE usb	DRIVERS	PERIPHERAL ST stm32-otghs
ADDRESS SPACE 0x48021800 - 0x48021c00	ID rng	TYPE rng	DRIVERS	PERIPHERAL ST stm32-rng
ADDRESS SPACE 0x52002000 - 0x52002400	ID flash	TYPE flash-controller	DRIVERS	PERIPHERAL ST stm32-flash-controller
ADDRESS SPACE 0x52004000 - 0x52004400	ID fmc	TYPE memory-controllers	DRIVERS	PERIPHERAL ST stm32h7-fmc
ADDRESS SPACE 0x52005000 - 0x52005034	ID quadspi	TYPE qspi	DRIVERS	PERIPHERAL ST stm32-qspi
ADDRESS SPACE 0x52007000 - 0x52007400	ID sdmmc1	TYPE mmc	DRIVERS	PERIPHERAL ST stm32-sdmmc
ADDRESS SPACE 0x58000000 - 0x58000400	ID exti	TYPE interrupt-controller	DRIVERS	PERIPHERAL ST stm32-exti
ADDRESS SPACE 0x58020000 - 0x58022400	ID pinctrl	TYPE pinctrl	DRIVERS	PERIPHERAL ST stm32-pinctrl
ADDRESS SPACE 0x58020000 - 0x58020400	ID gpioa	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58020400 - 0x58020800	ID gpiob	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58020800 - 0x58020c00	ID gpioc	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58020c00 - 0x58021000	ID gpiod	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58021000 - 0x58021400	ID gpioe	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58021400 - 0x58021800	ID gpiof	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58021800 - 0x58021c00	ID gpiog	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58021c00 - 0x58022000	ID gpioh	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58022000 - 0x58022400	ID gpioi	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58022400 - 0x58022800	ID gpioj	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58022800 - 0x58022c00	ID gpiok	TYPE gpio	DRIVERS	PERIPHERAL ST stm32-gpio
ADDRESS SPACE 0x58024400 - 0x58024800	ID rcc	TYPE clock	DRIVERS	PERIPHERAL ST stm32h7-rcc
ADDRESS SPACE 0x58026400 - 0x58026800	ID mailbox	TYPE ipm	DRIVERS	PERIPHERAL ST stm32-hsem-mailbox
ADDRESS SPACE 0xe000e010 - 0xe000e020	ID systick	TYPE timer	DRIVERS	PERIPHERAL ARM armv7m-systick
ADDRESS SPACE 0xe000e100 - 0xe000ed00	ID nvic	TYPE interrupt-controller	DRIVERS	PERIPHERAL ARM v7m-nvic