Hello World
A simple sample that prints “Hello World” to the console.
Run locally
You can run the Hello World demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp hello_world
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Shell Module
This demo demonstrates the Zephyr shell submodule, which allows the user to use a console interface to control the operating system.
Run locally
You can run the Shell Module demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp shell_module
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Philosophers
An implementation of a solution to the Dining Philosophers problem which demonstrates the usage of multiple preemptible and cooperative threads of differing priorities, as well as dynamic mutexes and thread sleeping.
Run locally
You can run the Philosophers demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp philosophers
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
TensorFlow Lite Micro
This sample TensorFlow application replicates a sine wave and demonstrates the basics of using TensorFlow Lite Micro. The model included with the sample is trained to replicate a sine function and generates x values to print alongside the y values predicted by the model.
Run locally
You can run the TensorFlow Lite Micro demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp tensorflow_lite_micro
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
MicroPython
This demo demonstrates the MicroPython Zephyr port by performing arithmetic operations, and by defining and calling simple functions.
Run locally
You can run the MicroPython demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp micropython
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Blinky
A basic sample that blinks an LED forever using the Zephyr GPIO API.
Run locally
You can run the Blinky demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp blinky
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Hello World (user)
A sample that prints “Hello World” to the console from a usermode thread.
Run locally
You can run the Hello World (user) demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp hello_world_user
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Synchronization
A simple application that demonstrates kernel scheduling, communication, and timing. Two threads take turns printing “Hello World” synchronized by semaphores.
Run locally
You can run the Synchronization demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp synchronization
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Download
LZ4
This sample application compresses and decompresses a block of data with the LZ4 algorithm and verifies the result.
Run locally
You can run the LZ4 demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp lz4
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Rust App
This sample demonstrates integration of Rust code into Zephyr RTOS projects.
Run locally
The Rust App demo is not supported in the Renode Zephyr dashboard on RAYTAC-MDBT53-DB-40-NRF5340-application-MCU yet.
You can contact us by clicking the button below if you want to see it supported.
Download
Kenning microTVM
This is a demonstration application of Kenning Zephyr Runtime running gesture recognition model on sample data using microTVM.
Run locally
You can run the Kenning microTVM demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp kenning-zephyr-runtime-microtvm
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Trace
Download
Kenning TFLite Micro
This is a demonstration application of Kenning Zephyr Runtime running gesture recognition model on sample data using TFLite Micro.
Run locally
You can run the Kenning TFLite Micro demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp kenning-zephyr-runtime-tflitemicro
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
UART output
Download
Kenning IREE
This is a demonstration application of Kenning Zephyr Runtime running gesture recognition model on sample data using IREE.
Run locally
You can run the Kenning IREE demo on the RAYTAC-MDBT53-DB-40-NRF5340-application-MCU board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:
pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b raytac_mdbt53_db_40_nrf5340_cpuapp kenning-zephyr-runtime-iree
Run in Colab
You can run this demo instantly on a cloud server in Google Colab by clicking the button below.
