• Home
  • Boards
  • SoCs
  • SoC Components
Renode
  • Home
  • Boards
  • SoCs
  • Vendors
  • SoC Components
Board photo

QuickLogic Quick Feather

EOS_S3
System on Chip
QuickLogic
Vendor

Supported software


Zephyr RTOS

Hello World


A simple sample that prints “Hello World” to the console.

Run locally

You can run the Hello World demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather hello_world

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather hello_world demo in Google Colab.

UART output

Trace

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the Hello World demo

SBOM data

Download Software Bill of Materials data for the Hello World demo

Robot Test Suite Log

See a Robot test results for the Hello World demo

Shell Module


This demo demonstrates the Zephyr shell submodule, which allows the user to use a console interface to control the operating system.

Run locally

You can run the Shell Module demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather shell_module

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather shell_module demo in Google Colab.

UART output

Trace

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the Shell Module demo

SBOM data

Download Software Bill of Materials data for the Shell Module demo

Robot Test Suite Log

See a Robot test results for the Shell Module demo

Philosophers


An implementation of a solution to the Dining Philosophers problem which demonstrates the usage of multiple preemptible and cooperative threads of differing priorities, as well as dynamic mutexes and thread sleeping.

Run locally

You can run the Philosophers demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather philosophers

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather philosophers demo in Google Colab.

UART output

Trace

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the Philosophers demo

SBOM data

Download Software Bill of Materials data for the Philosophers demo

Robot Test Suite Log

See a Robot test results for the Philosophers demo

TensorFlow Lite Micro


This sample TensorFlow application replicates a sine wave and demonstrates the basics of using TensorFlow Lite Micro. The model included with the sample is trained to replicate a sine function and generates x values to print alongside the y values predicted by the model.

Run locally

You can run the TensorFlow Lite Micro demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather tensorflow_lite_micro

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather tensorflow_lite_micro demo in Google Colab.

UART output

Trace

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the TensorFlow Lite Micro demo

SBOM data

Download Software Bill of Materials data for the TensorFlow Lite Micro demo

Robot Test Suite Log

See a Robot test results for the TensorFlow Lite Micro demo

MicroPython


This demo demonstrates the MicroPython Zephyr port by performing arithmetic operations, and by defining and calling simple functions.

Run locally

You can run the MicroPython demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather micropython

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather micropython demo in Google Colab.

UART output

Trace

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the MicroPython demo

SBOM data

Download Software Bill of Materials data for the MicroPython demo

Robot Test Suite Log

See a Robot test results for the MicroPython demo

Blinky


A basic sample that blinks an LED forever using the Zephyr GPIO API.

Run locally

The Blinky demo is not supported in the Renode Zephyr dashboard on QuickLogic Quick Feather yet.

You can contact us by clicking the button below if you want to see it supported.

Contact us

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the Blinky demo

SBOM data

Download Software Bill of Materials data for the Blinky demo

Robot Test Suite Log

See a Robot test results for the Blinky demo

Hello World (user)


A sample that prints “Hello World” to the console from a usermode thread.

Run locally

The Hello World (user) demo is not supported in the Renode Zephyr dashboard on QuickLogic Quick Feather yet.

You can contact us by clicking the button below if you want to see it supported.

Contact us

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the Hello World (user) demo

SBOM data

Download Software Bill of Materials data for the Hello World (user) demo

Synchronization


A simple application that demonstrates kernel scheduling, communication, and timing. Two threads take turns printing “Hello World” synchronized by semaphores.

Run locally

You can run the Synchronization demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather synchronization

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather synchronization demo in Google Colab.

UART output

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the Synchronization demo

SBOM data

Download Software Bill of Materials data for the Synchronization demo

Robot Test Suite Log

See a Robot test results for the Synchronization demo

LZ4


This sample application compresses and decompresses a block of data with the LZ4 algorithm and verifies the result.

Run locally

You can run the LZ4 demo on the QuickLogic Quick Feather board by following the instructions below. Assuming you have Python 3 and pip installed on your Linux machine, run the following commands to download Renode and the prebuilt binaries for this demo, and then run the simulation in Renode on your own machine:

pip3 install --user --upgrade git+https://github.com/antmicro/renode-run.git
renode-run demo -b quick_feather lz4

Run in Colab

You can run this demo instantly on a cloud server in Google Colab by clicking the button below.

Colab

Run quick_feather lz4 demo in Google Colab.

UART output

Trace

Download

Build artifacts

Download binaries, Renode scripts and other artifacts for the LZ4 demo

SBOM data

Download Software Bill of Materials data for the LZ4 demo

Robot Test Suite Log

See a Robot test results for the LZ4 demo

Components


EOS_S3

eos_s3

Similar boards


QuickLogic Qomu

eos_s3

Device tree


Device tree

Hierarchical device data structure

Renode dts2repl

Converted device tree source into Renode .repl file

Specification


Frequency:

61 MHz

Flash:

unknown

RAM:

unknown

ADDRESS SPACE ID TYPE DRIVER PERIPHERAL
ADDRESS SPACE 0x40004c00 - 0x40004db0 ID pinctrl TYPE pinctrl DRIVER driver PERIPHERAL QuickLogic eos-s3-pinctrl
ADDRESS SPACE 0x40005000 - 0x40006000 ID gpio TYPE gpio DRIVER driver PERIPHERAL QuickLogic eos-s3-gpio
ADDRESS SPACE 0x40010000 - 0x40011000 ID uart0 TYPE serial DRIVER driver PERIPHERAL ARM pl011
ADDRESS SPACE 0xe000e010 - 0xe000e020 ID systick TYPE timer DRIVER PERIPHERAL ARM armv7m-systick
ADDRESS SPACE 0xe000e100 - 0xe000ed00 ID nvic TYPE interrupt-controller DRIVER PERIPHERAL ARM v7m-nvic
  • What is Renode
  • Market cases
  • News
  • Docs
  • Zephyr Dashboard
  • Antmicro
  • Renode
Copyright © 2021-2023 Antmicro
d6287fa0