PK `|X!7X quick_feather/blinky.html
Opening Robot Framework log failed
- Verify that you have JavaScript enabled in your browser.
- Make sure you are using a modern enough browser. If using Internet Explorer, version 11 is required.
- Check are there messages in your browser's JavaScript error log. Please report the problem if you suspect you have encountered a bug.
PK `|X[nu u quick_feather/blinky-renode.log12:04:35.2900 [INFO] System bus created.
12:04:36.9666 [INFO] sysbus: Loading segment of 21360 bytes length at 0x20000000.
12:04:36.9875 [INFO] sysbus: Loading segment of 4 bytes length at 0x20005370.
12:04:37.5832 [INFO] Skipping serialization of the 'quick_feather-sysbus.uart0-recorder' external as it's marked as transient
12:04:38.1880 [INFO] quick_feather: Disposed.
PK `|X? e e quick_feather/blinky.replsram0: Memory.MappedMemory @ sysbus 0x20000000
size: 0x80000
// autogenerated
nvic0: IRQControllers.NVIC @ {
sysbus new Bus.BusPointRegistration { address: 0xe000e000; cpu: cpu0 }
}
-> cpu0@0
systickFrequency: 61440000
cpu0: CPU.CortexM @ sysbus
cpuType: "cortex-m4f"
nvic: nvic0
uart0: UART.PL011 @ sysbus 0x40010000
->nvic0@7
// cortex-m overlay
dwt: Miscellaneous.DWT @ sysbus 0xE0001000
frequency: 72000000
// quicklogic,eos_s3 overlay
sysbus:
init:
Tag <0x40005400, 0x4000549F> "AnalogIP" 0x0
Tag <0x400054A0, 0x400057FF> "AnalogIP (unlocked)" 0x1
PK `|Xc quick_feather/blinky.resclogFile $ORIGIN/blinky-renode.log True
using sysbus
$name?="quick_feather"
mach create $name
machine LoadPlatformDescription $ORIGIN/blinky.repl
showAnalyzer uart0
uart0 RecordToAsciinema $ORIGIN/blinky-asciinema
macro reset
"""
sysbus LoadELF @https://new-zephyr-dashboard.renode.io/zephyr/3723493f60a10f17d8d117fb8288a75da20cdd74/quick_feather/blinky/blinky.elf
cpu0 VectorTableOffset `sysbus GetSymbolAddress "_vector_table"`
cpu0 EnableProfilerCollapsedStack $ORIGIN/blinky-profile true
"""
runMacro $resetPK `|X c c quick_feather/blinky.robot*** Variables ***
${LED} sysbus.gpio.blueled
*** Test Cases ***
blinky on quick_feather
${x}= Execute Command include @${CURDIR}/blinky.resc
Create Terminal Tester sysbus.uart0 timeout=15
Create LED Tester ${LED}
Wait For Line On Uart *** Booting Zephyr OS build 3723493f60a1 *** pauseEmulation=true
Wait For Line On Uart LED state: (ON|OFF) treatAsRegex=true pauseEmulation=true
Assert LED Is Blinking testDuration=4 onDuration=1 offDuration=1 pauseEmulation=truePK `|X!7X quick_feather/blinky.htmlPK `|X[nu u quick_feather/blinky-renode.logPK `|X? e e quick_feather/blinky.replPK `|Xc d quick_feather/blinky.rescPK `|X c c quick_feather/blinky.robotPK j E